CSE010007900 Cavo Di Connessione Per Program Card Rapido

CC010007900 Cavo Di Connessione Per Program Card Rapido

15,49 €
Tasse escluse

Castle Creations CSE010007900 Cavo Di Connessione Per Program Card Rapido

Keep your wires neat!

Experienced modelers go to great pains to tie down their servo and throttle leads, and some find unplugging a Castle controller from the receiver disrupts all their work. Many have asked for something like a Y connector that gives an open lead for easy Castle linking, but a traditional Y harness doesn't work when the other branch of the Y is connected to a receiver - the signal line must be disconnected from the receiver.

Quick Connect detects the presence of a Castle Link adapter on the free lead and switches the controller's signal line from the receiver to the Castle Link.

The Quick Connect is recommended for the following ESCs:

Surface - Sidewinder v1/2/3/SCT, SW4, Sidewinder Micro, Sidewinder Micro 2, Mamba Micro Pro, Mamba Max, Mamba Max Pro, Mamba Monster, Mamba Monster 2, Mamba Monster X, Mamba X.

Air - Phoenix ICE, Phoenix ICE HV, Thunderbird, Phoenix, Phoenix HV.

Note: If you have a Castle ESC with dual BEC wires (Mamba XL X or Talon HV 120) or require more than 6 amps from the BEC you must use Quick Connect Duo.

Note: Neither Quick Connect, nor Quick Connect Duo will work with the Field Programming Cards when used as a standalone programmer. It will ONLY work when using the Field Programming Card as a Castle Link adapter.

2 Articoli