Informazioni

CSE011010600 Cablaggio Ricevitore Di Ricambio Per ESC Mamba Monster X , Mamba Monster X 8S e Mamba X Visualizza ingrandito

CSE011010600 Cablaggio Ricevitore Di Ricambio Per ESC Mamba Monster X , Mamba Monster X 8S e Mamba X

CSE-011-0106-00

Nuovo

Disponibile

8,61 € IVA esclusa

Dettagli

Castle Creations CSE011010600 Cablaggio Ricevitore Di Ricambio Per ESC Mamba Monster X , Mamba Monster X 8S e Mamba X

Replacement Receiver Harness for the Mamba Monster XMamba Monster X 8s and Mamba X ESCs.

Features:

  • Correct factory-specified connectors (RX and AUX)
  • Waterproof switch
  • Factory-specified wire gauge

Mamba Monster X Receiver Harness Connection Instructions

To Remove the Receiver Harness:

  1. Place slight pressure with thumb on capacitor shroud (Figure 1).
  2. Grip the harness close to the 8 pin connector and pull gently, at a slight angle away from ESC, to remove the harness from the ESC pin header (Figure 2).
    Note: Do not yank or forcefully pull harness out of ESC. May cause damage to ESC or harness.

To Replace the Receiver Harness:

  1. Place slight pressure with thumb on capacitor shroud (Figure 1).
  2. Following the color coded wiring diagram provided on the Monster X label, place the 8 pin connector onto the ESC pin header (Figure 3).
    Note: Misalignment of the harness will prevent the ESC from operating. Be sure that the brown wire is plugged in next to the negative (-) black power wire.
  3. Gently press on the 8 pin connector to fully engage with the ESC pin header.
  4. Reconnect cooling fan and receiver connections.

Recensioni

Ancora nessuna recensione da parte degli utenti.

Scrivi una recensione

CSE011010600 Cablaggio Ricevitore Di Ricambio Per ESC Mamba Monster X , Mamba Monster X 8S e Mamba X

CSE011010600 Cablaggio Ricevitore Di Ricambio Per ESC Mamba Monster X , Mamba Monster X 8S e Mamba X

19 altri prodotti della stessa categoria: